LAYERCALIBER

ELEGOO Saturn 4 Ultra resin exposure settings

ELEGOO publishes starting settings for 20 resins on the ELEGOO Saturn 4 Ultra, covering 136 colour settings. This page lists every one exactly as published on the ELEGOO Wiki (checked 23 October 2026), grouped by resin. Each value is a starting point: confirm it with a calibration print before relying on it.

Starting settings only, transcribed from the source. LayerCaliber has not physically print-tested them. Confirm with a calibration print and follow your printer and resin manufacturers' instructions.

Summary

Resins listed20
Colour settings136
Layer height50 µm
Rest after retract1 s
Bottom layersNot published by the source
Lift / retractNot published

ELEGOO lists the Saturn 4 Ultra 16K separately with different values. Make sure you use the page for your exact model.

Listed by ELEGOO as: Saturn 4 Ultra. Bottom layer count and transition layers are not published by this source.

Open any row in the calculator to copy, share or print it, and to record your own calibrated values.

Where to buy

Affiliate links: the Amazon links on this page are search links. As an Amazon Associate, LayerCaliber earns from qualifying purchases. They do not affect any setting shown, and LayerCaliber has not tested these products. Affiliate disclosure

Search Amazon for the ELEGOO Saturn 4 UltraAffiliate link

Settings by resin

ELEGOO Standard Resin 1.0

ELEGOO Standard Resin 1.0 on the ELEGOO Saturn 4 Ultra. Source: ELEGOO Wiki: ELEGOO Resin Settings, checked 23 October 2026. Layer height 50 µm.
ColoursNormal exposureBottom exposureRest after retractLift / retractCalculator
Grey, Clear Red, Clear Green, Clear Blue, Blue, Yellow, Beige2.5–3 s25–35 s1 sNot publishedOpen in calculator
Black3–3.5 s30–35 s1 sNot publishedOpen in calculator
Translucent, Maroon3–3.5 s35–40 s1 sNot publishedOpen in calculator

Search Amazon for ELEGOO Standard Resin 1.0Affiliate link · Check the listing matches the exact resin and colour.

ELEGOO Standard Resin 2.0

ELEGOO Standard Resin 2.0 on the ELEGOO Saturn 4 Ultra. Source: ELEGOO Wiki: ELEGOO Resin Settings, checked 23 October 2026. Layer height 50 µm.
ColoursNormal exposureBottom exposureRest after retractLift / retractCalculator
Grey, White2.5–3 s25–35 s1 sNot publishedOpen in calculator
Black3–3.5 s30–35 s1 sNot publishedOpen in calculator
Orchid, Slate Blue, Medium Slate Blue3.5–4 s35–40 s1 sNot publishedOpen in calculator

Search Amazon for ELEGOO Standard Resin 2.0Affiliate link · Check the listing matches the exact resin and colour.

ELEGOO ABS-Like Resin 1.0

ELEGOO ABS-Like Resin 1.0 on the ELEGOO Saturn 4 Ultra. Source: ELEGOO Wiki: ELEGOO Resin Settings, checked 23 October 2026. Layer height 50 µm.
ColoursNormal exposureBottom exposureRest after retractLift / retractCalculator
Grey, White, Clear Red, Clear Green, Clear Blue, Blue, Yellow, Beige, Mint Green, Smoky Black2.5–3 s25–35 s1 sNot publishedOpen in calculator
Black3–3.5 s30–35 s1 sNot publishedOpen in calculator
Clear6–8 s35–40 s1 sNot publishedOpen in calculator
Maroon3–3.5 s35–40 s1 sNot publishedOpen in calculator

Search Amazon for ELEGOO ABS-Like Resin 1.0Affiliate link · Check the listing matches the exact resin and colour.

ELEGOO ABS-Like Resin 2.0

ELEGOO ABS-Like Resin 2.0 on the ELEGOO Saturn 4 Ultra. Source: ELEGOO Wiki: ELEGOO Resin Settings, checked 23 October 2026. Layer height 50 µm.
ColoursNormal exposureBottom exposureRest after retractLift / retractCalculator
Grey2.5–3 s25–35 s1 sNot publishedOpen in calculator

Search Amazon for ELEGOO ABS-Like Resin 2.0Affiliate link · Check the listing matches the exact resin and colour.

ELEGOO ABS-Like Resin 3.0

ELEGOO ABS-Like Resin 3.0 on the ELEGOO Saturn 4 Ultra. Source: ELEGOO Wiki: ELEGOO Resin Settings, checked 23 October 2026. Layer height 50 µm.
ColoursNormal exposureBottom exposureRest after retractLift / retractCalculator
Grey, Clear Red, Clear Green, Mint Green, Yellow, Smoky Black, Beige, White, Clear Blue, Blue2.5–3 s25–35 s1 sNot publishedOpen in calculator
Black2.5–3 s30–35 s1 sNot publishedOpen in calculator
Translucent2.5–3 s35–40 s1 sNot publishedOpen in calculator

Search Amazon for ELEGOO ABS-Like Resin 3.0Affiliate link · Check the listing matches the exact resin and colour.

ELEGOO ABS-Like Resin 3.0 +

ELEGOO ABS-Like Resin 3.0 + on the ELEGOO Saturn 4 Ultra. Source: ELEGOO Wiki: ELEGOO Resin Settings, checked 23 October 2026. Layer height 50 µm.
ColoursNormal exposureBottom exposureRest after retractLift / retractCalculator
Grey, Clear Red, Clear Green, Mint Green, Yellow, Smoky Black, Beige, White, Clear Blue, Blue2.5–3 s25–35 s1 sNot publishedOpen in calculator
Black2.5–3 s30–35 s1 sNot publishedOpen in calculator
Translucent2.5–3 s35–40 s1 sNot publishedOpen in calculator

Search Amazon for ELEGOO ABS-Like Resin 3.0 +Affiliate link · Check the listing matches the exact resin and colour.

ELEGOO ABS-Like Resin 3.0 Pro

ELEGOO ABS-Like Resin 3.0 Pro on the ELEGOO Saturn 4 Ultra. Source: ELEGOO Wiki: ELEGOO Resin Settings, checked 23 October 2026. Layer height 50 µm.
ColoursNormal exposureBottom exposureRest after retractLift / retractCalculator
Grey, Black, White, Beige, Clear Green, Translucent, Yellow2.5–3 s30–35 s1 sNot publishedOpen in calculator

Search Amazon for ELEGOO ABS-Like Resin 3.0 ProAffiliate link · Check the listing matches the exact resin and colour.

ELEGOO Water Washable Resin

ELEGOO Water Washable Resin on the ELEGOO Saturn 4 Ultra. Source: ELEGOO Wiki: ELEGOO Resin Settings, checked 23 October 2026. Layer height 50 µm.
ColoursNormal exposureBottom exposureRest after retractLift / retractCalculator
Ceramic Grey, White, Clear Red, Clear Green, Clear Blue, Yellow, Beige, Mint Green, Smoky Black2.5–3 s25–35 s1 sNot publishedOpen in calculator
Black3–3.5 s30–35 s1 sNot publishedOpen in calculator

Search Amazon for ELEGOO Water Washable ResinAffiliate link · Check the listing matches the exact resin and colour.

ELEGOO Water Washable 2.0 Resin

ELEGOO Water Washable 2.0 Resin on the ELEGOO Saturn 4 Ultra. Source: ELEGOO Wiki: ELEGOO Resin Settings, checked 23 October 2026. Layer height 50 µm.
ColoursNormal exposureBottom exposureRest after retractLift / retractCalculator
Ceramic Grey, White, Clear Red, Clear Green, Clear Blue, Yellow, Beige, Mint Green, Smoky Black, Blue2.5–3 s25–35 s1 sNot publishedOpen in calculator
Black3–3.5 s30–35 s1 sNot publishedOpen in calculator

Search Amazon for ELEGOO Water Washable 2.0 ResinAffiliate link · Check the listing matches the exact resin and colour.

ELEGOO Water Washable ABS-Like Resin

ELEGOO Water Washable ABS-Like Resin on the ELEGOO Saturn 4 Ultra. Source: ELEGOO Wiki: ELEGOO Resin Settings, checked 23 October 2026. Layer height 50 µm.
ColoursNormal exposureBottom exposureRest after retractLift / retractCalculator
Ceramic Grey, White, Clear Red, Clear Green, Smoky Black, Clear Blue, Yellow, Beige, Mint Green, Blue2.8–3.2 s25–30 s1 sNot publishedOpen in calculator
Black3–3.5 s30–35 s1 sNot publishedOpen in calculator

Search Amazon for ELEGOO Water Washable ABS-Like ResinAffiliate link · Check the listing matches the exact resin and colour.

ELEGOO Standard Plant-based Photopolymer Resin

ELEGOO Standard Plant-based Photopolymer Resin on the ELEGOO Saturn 4 Ultra. Source: ELEGOO Wiki: ELEGOO Resin Settings, checked 23 October 2026. Layer height 50 µm.
ColoursNormal exposureBottom exposureRest after retractLift / retractCalculator
Grey, White, Clear Green2.5–3 s25–35 s1 sNot publishedOpen in calculator
Black3–3.5 s30–35 s1 sNot publishedOpen in calculator
Translucent3–3.5 s35–40 s1 sNot publishedOpen in calculator

Search Amazon for ELEGOO Standard Plant-based Photopolymer ResinAffiliate link · Check the listing matches the exact resin and colour.

ELEGOO ABS-Like Plant-based Photopolymer Resin

ELEGOO ABS-Like Plant-based Photopolymer Resin on the ELEGOO Saturn 4 Ultra. Source: ELEGOO Wiki: ELEGOO Resin Settings, checked 23 October 2026. Layer height 50 µm.
ColoursNormal exposureBottom exposureRest after retractLift / retractCalculator
Grey, White, Clear Green2.5–3 s25–35 s1 sNot publishedOpen in calculator
Black3–3.5 s30–35 s1 sNot publishedOpen in calculator

Search Amazon for ELEGOO ABS-Like Plant-based Photopolymer ResinAffiliate link · Check the listing matches the exact resin and colour.

ELEGOO 8K Water Washable Photopolymer Resin

ELEGOO 8K Water Washable Photopolymer Resin on the ELEGOO Saturn 4 Ultra. Source: ELEGOO Wiki: ELEGOO Resin Settings, checked 23 October 2026. Layer height 50 µm.
ColoursNormal exposureBottom exposureRest after retractLift / retractCalculator
Space Grey, Vanilla, White Smoke2.5–3 s25–35 s1 sNot publishedOpen in calculator

Search Amazon for ELEGOO 8K Water Washable Photopolymer ResinAffiliate link · Check the listing matches the exact resin and colour.

ELEGOO 8K Standard Photopolymer Resin

ELEGOO 8K Standard Photopolymer Resin on the ELEGOO Saturn 4 Ultra. Source: ELEGOO Wiki: ELEGOO Resin Settings, checked 23 October 2026. Layer height 50 µm.
ColoursNormal exposureBottom exposureRest after retractLift / retractCalculator
Space Grey, Red Clay, Vanilla, White Smoke2.5–3 s25–35 s1 sNot publishedOpen in calculator

Search Amazon for ELEGOO 8K Standard Photopolymer ResinAffiliate link · Check the listing matches the exact resin and colour.

ELEGOO 8K ABS-Like 3.0 Photopolymer Resin

ELEGOO 8K ABS-Like 3.0 Photopolymer Resin on the ELEGOO Saturn 4 Ultra. Source: ELEGOO Wiki: ELEGOO Resin Settings, checked 23 October 2026. Layer height 50 µm.
ColoursNormal exposureBottom exposureRest after retractLift / retractCalculator
Space Grey, Vanilla, White Smoke, Red Clay2.5–3 s25–35 s1 sNot publishedOpen in calculator

Search Amazon for ELEGOO 8K ABS-Like 3.0 Photopolymer ResinAffiliate link · Check the listing matches the exact resin and colour.

ELEGOO 8K Water Washable 2.0 Photopolymer Resin

ELEGOO 8K Water Washable 2.0 Photopolymer Resin on the ELEGOO Saturn 4 Ultra. Source: ELEGOO Wiki: ELEGOO Resin Settings, checked 23 October 2026. Layer height 50 µm.
ColoursNormal exposureBottom exposureRest after retractLift / retractCalculator
Space Grey, Vanilla, White Smoke, Red Clay2.5–3 s25–35 s1 sNot publishedOpen in calculator

Search Amazon for ELEGOO 8K Water Washable 2.0 Photopolymer ResinAffiliate link · Check the listing matches the exact resin and colour.

ELEGOO 8K Water Washable ABS-Like Photopolymer Resin

ELEGOO 8K Water Washable ABS-Like Photopolymer Resin on the ELEGOO Saturn 4 Ultra. Source: ELEGOO Wiki: ELEGOO Resin Settings, checked 23 October 2026. Layer height 50 µm.
ColoursNormal exposureBottom exposureRest after retractLift / retractCalculator
Space Grey, Vanilla, White Smoke, Red Clay2.5–3 s25–35 s1 sNot publishedOpen in calculator

Search Amazon for ELEGOO 8K Water Washable ABS-Like Photopolymer ResinAffiliate link · Check the listing matches the exact resin and colour.

ELEGOO ABS-Like Ultra Resin

ELEGOO ABS-Like Ultra Resin on the ELEGOO Saturn 4 Ultra. Source: ELEGOO Wiki: ELEGOO Resin Settings, checked 23 October 2026. Layer height 50 µm.
ColoursNormal exposureBottom exposureRest after retractLift / retractCalculator
Grey, White, Black, Beige, Yellow, Clear Blue, Clear Red, Clear Green, Neon-Pumpkin, Neon-Lemon, Neon-Lime, Neon-Peach2.5–3.5 s25–35 s1 sNot publishedOpen in calculator

Search Amazon for ELEGOO ABS-Like Ultra ResinAffiliate link · Check the listing matches the exact resin and colour.

ELEGOO Tough Resin 1.0

ELEGOO Tough Resin 1.0 on the ELEGOO Saturn 4 Ultra. Source: ELEGOO Wiki: ELEGOO Resin Settings, checked 23 October 2026. Layer height 50 µm.
ColoursNormal exposureBottom exposureRest after retractLift / retractCalculator
Grey, Black2.5–3 s35–40 s1 sNot publishedOpen in calculator

Search Amazon for ELEGOO Tough Resin 1.0Affiliate link · Check the listing matches the exact resin and colour.

ELEGOO Thermochromic Resin

ELEGOO Thermochromic Resin on the ELEGOO Saturn 4 Ultra. Source: ELEGOO Wiki: ELEGOO Resin Settings, checked 23 October 2026. Layer height 50 µm.
ColoursNormal exposureBottom exposureRest after retractLift / retractCalculator
Grey To Purple2.5–3 s35–40 s1 sNot publishedOpen in calculator

Search Amazon for ELEGOO Thermochromic ResinAffiliate link · Check the listing matches the exact resin and colour.

Using these settings

  1. Pick the row for your exact resin and colour. Do not transfer values to other printers, resins or colours.
  2. Where a range is given, start inside it.
  3. Run a calibration print from its original creator (see calibration tests) and adjust according to their instructions.
  4. Record what worked in the calculator's "Record your calibrated values" panel so it is included when you copy or print your settings.

Other Saturn printers

All printers