ELEGOO Mars 4 Ultra resin exposure settings
ELEGOO publishes starting settings for 21 resins on the ELEGOO Mars 4 Ultra, covering 273 colour settings. This page lists every one exactly as published on the ELEGOO Wiki (checked 23 October 2026), grouped by resin. Each value is a starting point: confirm it with a calibration print before relying on it.
Starting settings only, transcribed from the source. LayerCaliber has not physically print-tested them. Confirm with a calibration print and follow your printer and resin manufacturers' instructions.
Summary
ELEGOO lists separate settings for each print mode on this printer. The tables below are grouped by mode; each mode has its own layer height.
Listed by ELEGOO as: Mars 4 Ultra(fast resin+fast printing), Mars 4 Ultra(normal resin+fast printing), Mars 4 Ultra(normal resin+normal speed). Bottom layer count and transition layers are not published by this source.
Open any row in the calculator to copy, share or print it, and to record your own calibrated values.
Where to buy
Affiliate links: the Amazon links on this page are search links. As an Amazon Associate, LayerCaliber earns from qualifying purchases. They do not affect any setting shown, and LayerCaliber has not tested these products. Affiliate disclosure
Search Amazon for the ELEGOO Mars 4 UltraAffiliate link
Settings by resin
- ELEGOO Standard Resin 1.0
- ELEGOO Standard Resin 2.0
- ELEGOO ABS-Like Resin 1.0
- ELEGOO ABS-Like Resin 2.0
- ELEGOO ABS-Like Resin 3.0
- ELEGOO ABS-Like Resin 3.0 +
- ELEGOO ABS-Like Resin 3.0 Pro
- ELEGOO Water Washable Resin
- ELEGOO Water Washable 2.0 Resin
- ELEGOO Water Washable ABS-Like Resin
- ELEGOO Standard Plant-based Photopolymer Resin
- ELEGOO ABS-Like Plant-based Photopolymer Resin
- ELEGOO 8K Water Washable Photopolymer Resin
- ELEGOO 8K Standard Photopolymer Resin
- ELEGOO 8K ABS-Like 3.0 Photopolymer Resin
- ELEGOO 8K Water Washable ABS-Like Photopolymer Resin
- ELEGOO 8K Water Washable 2.0 Photopolymer Resin
- ELEGOO ABS-Like Ultra Resin
- ELEGOO Tough Resin 1.0
- ELEGOO Thermochromic Resin
- ELEGOO Rapid Standard Photopolymer Resin
ELEGOO Standard Resin 1.0
Normal resin + normal speed · 50 µm
ELEGOO note: This parameter works for Normal Resin + Normal Speed
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Grey, Clear Red, Clear Green, Clear Blue, Blue, Yellow, Beige | 2.5–3 s | 25–30 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
| Black | 3–3.5 s | 25–30 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
| Translucent, Maroon | 3–3.5 s | 30–35 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
Normal resin + fast printing · 100 µm
ELEGOO note: This parameter works for Normal Resin+ Fast Speed (Hollow model, wall thickness>2mm, model has holes)
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Grey, Clear Red, Clear Green, Clear Blue, Blue, Yellow, Beige | 3.5–4 s | 35–40 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
| Black, Translucent, Maroon | 4.5–5 s | 40–45 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
Search Amazon for ELEGOO Standard Resin 1.0Affiliate link · Check the listing matches the exact resin and colour.
ELEGOO Standard Resin 2.0
Normal resin + normal speed · 50 µm
ELEGOO note: This parameter works for Normal Resin + Normal Speed
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| White, Grey | 2.5–3 s | 25–30 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
| Black | 3–3.5 s | 30–35 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
| Orchid, Slate Blue, Medium Slate Blue | 3.5–4 s | 35–40 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
Normal resin + fast printing · 100 µm
ELEGOO note: This parameter works for Normal Resin+ Fast Speed (Hollow model, wall thickness>2mm, model has holes)
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| White, Grey | 3.5–4 s | 35–40 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
| Black | 4.5–5 s | 40–45 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
| Orchid, Slate Blue, Medium Slate Blue | 4.5–5 s | 45–50 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
Search Amazon for ELEGOO Standard Resin 2.0Affiliate link · Check the listing matches the exact resin and colour.
ELEGOO ABS-Like Resin 1.0
Normal resin + normal speed · 50 µm
ELEGOO note: This parameter works for Normal Resin + Normal Speed
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Grey, White, Clear Red, Clear Green, Clear Blue, Blue, Yellow, Mint Green, Smoky Black | 2.5–3 s | 25–30 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
| Black, Maroon | 3–3.5 s | 30–35 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
| Clear | 6–8 s | 35–40 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
| Beige | 2.8–3.2 s | 30–35 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
Normal resin + fast printing · 100 µm
ELEGOO note: This parameter works for Normal Resin+ Fast Speed (Hollow model, wall thickness>2mm, model has holes)
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Grey, White, Clear Red, Clear Green, Clear Blue, Blue, Yellow, Maroon, Beige, Mint Green, Smoky Black | 3.5–4 s | 35–40 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
| Black | 4.5–5 s | 40–45 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
| Clear | 10–12 s | 45–50 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
Search Amazon for ELEGOO ABS-Like Resin 1.0Affiliate link · Check the listing matches the exact resin and colour.
ELEGOO ABS-Like Resin 2.0
Normal resin + normal speed · 50 µm
ELEGOO note: This parameter works for Normal Resin + Normal Speed
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Grey | 2.5–3 s | 25–30 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
Normal resin + fast printing · 100 µm
ELEGOO note: This parameter works for Normal Resin+ Fast Speed (Hollow model, wall thickness>2mm, model has holes)
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Grey | 3.5–4 s | 35–40 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
Search Amazon for ELEGOO ABS-Like Resin 2.0Affiliate link · Check the listing matches the exact resin and colour.
ELEGOO ABS-Like Resin 3.0
Normal resin + normal speed · 50 µm
ELEGOO note: This parameter works for Normal Resin + Normal Speed
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Grey, Clear Red, Clear Green, Translucent, Mint Green, Yellow, Smoky Black, White, Clear Blue, Blue, Beige | 2.8–3.2 s | 30–35 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
| Black | 3–3.5 s | 30–35 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
Normal resin + fast printing · 100 µm
ELEGOO note: This parameter works for Normal Resin+ Fast Speed (Hollow model, wall thickness>2mm, model has holes)
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Grey, Clear Red, Clear Green, Translucent, Mint Green, Yellow, Smoky Black, Beige, White, Clear Blue, Blue | 3.8–4.5 s | 35–40 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
| Black | 4–4.5 s | 40–45 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
Search Amazon for ELEGOO ABS-Like Resin 3.0Affiliate link · Check the listing matches the exact resin and colour.
ELEGOO ABS-Like Resin 3.0 +
Normal resin + normal speed · 50 µm
ELEGOO note: This parameter works for Normal Resin + Normal Speed
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Grey, Clear Red, Clear Green, Translucent, Mint Green, Yellow, Smoky Black, White, Clear Blue, Blue, Beige | 2.8–3.2 s | 30–35 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
| Black | 3–3.5 s | 30–35 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
Normal resin + fast printing · 100 µm
ELEGOO note: This parameter works for Normal Resin+ Fast Speed (Hollow model, wall thickness>2mm, model has holes)
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Grey, Clear Red, Clear Green, Translucent, Mint Green, Yellow, Smoky Black, Beige, White, Clear Blue, Blue | 3.8–4.5 s | 35–40 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
| Black | 4–4.5 s | 40–45 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
Search Amazon for ELEGOO ABS-Like Resin 3.0 +Affiliate link · Check the listing matches the exact resin and colour.
ELEGOO ABS-Like Resin 3.0 Pro
Normal resin + normal speed · 50 µm
ELEGOO note: This parameter works for Normal Resin + Normal Speed
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Grey, White, Beige, Clear Green, Yellow | 2.8–3.2 s | 30–35 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
| Black, Translucent | 3–3.5 s | 30–35 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
Normal resin + fast printing · 100 µm
ELEGOO note: This parameter works for Normal Resin+ Fast Speed (Hollow model, wall thickness>2mm, model has holes)
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Grey, White, Beige, Clear Green, Yellow | 3.8–4.5 s | 35–40 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
| Black, Translucent | 4.5–5 s | 35–40 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
Search Amazon for ELEGOO ABS-Like Resin 3.0 ProAffiliate link · Check the listing matches the exact resin and colour.
ELEGOO Water Washable Resin
Normal resin + normal speed · 50 µm
ELEGOO note: This parameter works for Normal Resin + Normal Speed
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Ceramic Grey, White, Clear Red, Clear Green, Clear Blue, Yellow, Beige, Mint Green, Smoky Black | 2.5–3 s | 25–30 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
| Black | 3–3.5 s | 25–30 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
Normal resin + fast printing · 100 µm
ELEGOO note: This parameter works for Normal Resin+ Fast Speed (Hollow model, wall thickness>2mm, model has holes)
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Ceramic Grey, White, Clear Red, Clear Green, Clear Blue, Yellow, Beige, Mint Green, Smoky Black | 3.5–4 s | 35–40 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
| Black | 4–4.5 s | 40–45 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
Search Amazon for ELEGOO Water Washable ResinAffiliate link · Check the listing matches the exact resin and colour.
ELEGOO Water Washable 2.0 Resin
Normal resin + normal speed · 50 µm
ELEGOO note: This parameter works for Normal Resin + Normal Speed
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Ceramic Grey, White, Clear Red, Clear Green, Clear Blue, Yellow, Beige, Mint Green, Smoky Black, Blue | 2.5–3 s | 25–30 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
| Black | 3–3.5 s | 25–30 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
Normal resin + fast printing · 100 µm
ELEGOO note: This parameter works for Normal Resin+ Fast Speed (Hollow model, wall thickness>2mm, model has holes)
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Ceramic Grey, White, Clear Red, Clear Green, Clear Blue, Yellow, Beige, Mint Green, Smoky Black, Blue | 3.5–4 s | 35–40 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
| Black | 4–4.5 s | 40–45 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
Search Amazon for ELEGOO Water Washable 2.0 ResinAffiliate link · Check the listing matches the exact resin and colour.
ELEGOO Water Washable ABS-Like Resin
Normal resin + normal speed · 50 µm
ELEGOO note: This parameter works for Normal Resin + Normal Speed
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Ceramic Grey, White, Clear Red, Clear Green, Smoky Black, Clear Blue, Yellow, Beige, Mint Green, Blue | 2.8–3.2 s | 25–30 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
| Black | 3–3.5 s | 30–35 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
Normal resin + fast printing · 100 µm
ELEGOO note: This parameter works for Normal Resin+ Fast Speed (Hollow model, wall thickness>2mm, model has holes)
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Ceramic Grey, White, Black, Clear Red, Clear Green, Smoky Black, Clear Blue, Yellow, Beige, Mint Green, Blue | 3.8–4.2 s | 35–40 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
Search Amazon for ELEGOO Water Washable ABS-Like ResinAffiliate link · Check the listing matches the exact resin and colour.
ELEGOO Standard Plant-based Photopolymer Resin
Normal resin + normal speed · 50 µm
ELEGOO note: This parameter works for Normal Resin + Normal Speed
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Grey, White, Clear Green | 2.5–3 s | 25–30 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
| Black, Translucent | 3–3.5 s | 25–30 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
Normal resin + fast printing · 100 µm
ELEGOO note: This parameter works for Normal Resin+ Fast Speed (Hollow model, wall thickness>2mm, model has holes)
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Grey, White, Clear Green | 3.5–4 s | 35–40 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
| Black, Translucent | 4–4.5 s | 40–45 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
Search Amazon for ELEGOO Standard Plant-based Photopolymer ResinAffiliate link · Check the listing matches the exact resin and colour.
ELEGOO ABS-Like Plant-based Photopolymer Resin
Normal resin + normal speed · 50 µm
ELEGOO note: This parameter works for Normal Resin + Normal Speed
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Grey, White, Clear Green | 2.5–3 s | 25–30 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
| Black | 3–3.5 s | 25–30 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
Normal resin + fast printing · 100 µm
ELEGOO note: This parameter works for Normal Resin+ Fast Speed (Hollow model, wall thickness>2mm, model has holes)
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Grey, White, Clear Green | 3.5–4 s | 35–40 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
| Black | 4–4.5 s | 40–45 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
Search Amazon for ELEGOO ABS-Like Plant-based Photopolymer ResinAffiliate link · Check the listing matches the exact resin and colour.
ELEGOO 8K Water Washable Photopolymer Resin
Normal resin + normal speed · 50 µm
ELEGOO note: This parameter works for Normal Resin + Normal Speed
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Space Grey, Vanilla, White Smoke | 2.5–3 s | 25–30 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
Normal resin + fast printing · 100 µm
ELEGOO note: This parameter works for Normal Resin+ Fast Speed (Hollow model, wall thickness>2mm, model has holes)
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Space Grey, Vanilla, White Smoke | 4–5 s | 35–40 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
Search Amazon for ELEGOO 8K Water Washable Photopolymer ResinAffiliate link · Check the listing matches the exact resin and colour.
ELEGOO 8K Standard Photopolymer Resin
Normal resin + normal speed · 50 µm
ELEGOO note: This parameter works for Normal Resin + Normal Speed
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Space Grey, Red Clay, Vanilla, White Smoke | 2.5–3 s | 25–30 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
Normal resin + fast printing · 100 µm
ELEGOO note: This parameter works for Normal Resin+ Fast Speed (Hollow model, wall thickness>2mm, model has holes)
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Space Grey, Red Clay, Vanilla, White Smoke | 4–5 s | 35–40 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
Search Amazon for ELEGOO 8K Standard Photopolymer ResinAffiliate link · Check the listing matches the exact resin and colour.
ELEGOO 8K ABS-Like 3.0 Photopolymer Resin
Normal resin + normal speed · 50 µm
ELEGOO note: This parameter works for Normal Resin + Normal Speed
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Space Grey, White Smoke, Red Clay, Vanilla | 2.5–3 s | 25–35 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
Normal resin + fast printing · 100 µm
ELEGOO note: This parameter works for Normal Resin+ Fast Speed (Hollow model, wall thickness>2mm, model has holes)
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Space Grey, White Smoke, Red Clay, Vanilla | 4.5–5 s | 35–40 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
Search Amazon for ELEGOO 8K ABS-Like 3.0 Photopolymer ResinAffiliate link · Check the listing matches the exact resin and colour.
ELEGOO 8K Water Washable ABS-Like Photopolymer Resin
Normal resin + normal speed · 50 µm
ELEGOO note: This parameter works for Normal Resin + Normal Speed
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Space Grey, White Smoke, Red Clay, Vanilla | 2.5–3 s | 25–35 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
Normal resin + fast printing · 100 µm
ELEGOO note: This parameter works for Normal Resin+ Fast Speed (Hollow model, wall thickness>2mm, model has holes)
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Space Grey, White Smoke, Red Clay, Vanilla | 4.5–5 s | 35–40 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
Search Amazon for ELEGOO 8K Water Washable ABS-Like Photopolymer ResinAffiliate link · Check the listing matches the exact resin and colour.
ELEGOO 8K Water Washable 2.0 Photopolymer Resin
Normal resin + normal speed · 50 µm
ELEGOO note: This parameter works for Normal Resin + Normal Speed
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Space Grey, White Smoke, Red Clay, Vanilla | 2.5–3 s | 25–35 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
Normal resin + fast printing · 100 µm
ELEGOO note: This parameter works for Normal Resin+ Fast Speed (Hollow model, wall thickness>2mm, model has holes)
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Space Grey, White Smoke, Red Clay, Vanilla | 4.5–5 s | 35–40 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
Search Amazon for ELEGOO 8K Water Washable 2.0 Photopolymer ResinAffiliate link · Check the listing matches the exact resin and colour.
ELEGOO ABS-Like Ultra Resin
Normal resin + normal speed · 50 µm
ELEGOO note: This parameter works for Normal Resin + Normal Speed
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Grey, White, Black, Beige, Yellow, Clear Blue, Clear Red, Clear Green, Neon-Pumpkin, Neon-Lemon, Neon-Lime, Neon-Peach | 2.5–3.5 s | 25–35 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
Normal resin + fast printing · 100 µm
ELEGOO note: This parameter works for Normal Resin+ Fast Speed (Hollow model, wall thickness>2mm, model has holes)
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| White, Black, Beige, Yellow, Clear Blue, Clear Red, Clear Green, Neon-Pumpkin, Grey, Neon-Lemon, Neon-Lime, Neon-Peach | 4.5–5 s | 35–40 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
Search Amazon for ELEGOO ABS-Like Ultra ResinAffiliate link · Check the listing matches the exact resin and colour.
ELEGOO Tough Resin 1.0
Normal resin + normal speed · 50 µm
ELEGOO note: This parameter works for Normal Resin + Normal Speed
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Grey, Black | 2.5–3 s | 25–30 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
Normal resin + fast printing · 100 µm
ELEGOO note: This parameter works for Normal Resin+ Fast Speed (Hollow model, wall thickness>2mm, model has holes)
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Grey, Black | 3.8–4.5 s | 35–40 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
Search Amazon for ELEGOO Tough Resin 1.0Affiliate link · Check the listing matches the exact resin and colour.
ELEGOO Thermochromic Resin
Normal resin + normal speed · 50 µm
ELEGOO note: This parameter works for Normal Resin + Normal Speed
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Grey To Purple | 2.5–3 s | 25–30 s | 0.5 s | 2+3 mm at 75+230 mm/min; retract 230+75 mm/min | Open in calculator |
Normal resin + fast printing · 100 µm
ELEGOO note: This parameter works for Normal Resin+ Fast Speed (Hollow model, wall thickness>2mm, model has holes)
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Grey To Purple | 3.5–4 s | 35–40 s | 0.5 s | 3+2 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
Search Amazon for ELEGOO Thermochromic ResinAffiliate link · Check the listing matches the exact resin and colour.
ELEGOO Rapid Standard Photopolymer Resin
Fast resin + fast printing · 100 µm
ELEGOO note: This parameter works for Fast Resin+ Fast Speed (Hollow model, wall thickness>2mm, model has holes)
| Colours | Normal exposure | Bottom exposure | Rest after retract | Lift / retract | Calculator |
|---|---|---|---|---|---|
| Grey | 1.8 s | 30–40 s | 0 s | 2+1 mm at 300+1000 mm/min; retract 1000+300 mm/min | Open in calculator |
Search Amazon for ELEGOO Rapid Standard Photopolymer ResinAffiliate link · Check the listing matches the exact resin and colour.
Using these settings
- Pick the row for your exact resin and colour. Do not transfer values to other printers, resins or colours.
- Where a range is given, start inside it.
- Run a calibration print from its original creator (see calibration tests) and adjust according to their instructions.
- Record what worked in the calculator's "Record your calibrated values" panel so it is included when you copy or print your settings.